Hi,
We have a IBM eServer X series 236 running Windows sever 2003 standard. We have an EXP400 with 13 drives as part of a Raid Array connected to a dual channel SCSI card. This past weekend the SCSI channel 0 went bad, the drives do not show up and they all have amber lights on them.
We moved the SCSI cable to Channel 1 and the drive lights went green and all of them looked normal but when we restarted the sever we received the message the "drives are not responding or they are in a different location".
How do we reconfigure the SCSI card from channel 0 to channel 1 so that the drives can be found?
Thanks,
Taino Negro 9